IP65 Solar Outdoor Wall Light with PIR Motion Sensor

Light Your Entrance with a Solar Outdoor Wall Light

An IP65 solar outdoor wall light that stays dim after dark and brightens when its PIR sensor detects movement. Available in warm white or cold white.

Key Features

• After dark, the light stays dim until it detects movement. It then switches to full brightness and returns to dim a few seconds after motion stops.
• The PIR motion sensor covers a 90° angle and detects movement from 2–5 metres, making it suitable for entrances, garden paths and outdoor stairs.
• The integrated solar panel charges the built-in battery in 6–8 hours of direct sunlight. A full charge provides approximately 8 hours of illumination.
• The stainless steel body and polycarbonate lens are rated IP65 for outdoor use. The light mounts to a wall with the included screws and wall plugs and requires no wiring.
• Choose warm white for a softer glow or cold white for a crisper look. Available as a single light or in sets of two or four.

Specifications

• Body Material — Stainless steel
• Lens Material — Polycarbonate (PC)
• Dimensions — 10 cm W × 8 cm H × 8.3 cm D (3.94 × 3.15 × 3.27 in)
• Light Source — 4 LEDs
• Light Colour Options — Warm White, Cold White
• Solar Panel — Integrated at the top of the fitting
• Battery — Built-in 14500 lithium-ion battery, 3.7V, 400mAh
• Charging Time — 6–8 hours in direct sunlight
• Runtime — Approximately 8 hours on a full charge
• Sensor Type — PIR motion sensor
• Detection Angle — 90°
• Detection Range — 2–5 m
• Recommended Installation Height — 1–3 m above ground
• Sensor Operation — Active in dark conditions only
• Power Source — Solar
• Voltage — 3.7V
• Protection Rating — IP65
• Installation — Screw mounted, with screws and wall plugs included
• Set Quantities — 1, 2 or 4 lights
• Use — Outdoor walls, fences, stairs, pathways, porches and balconies

What's in the Box

• 1, 2 or 4 × Solar Outdoor Wall Light with PIR Motion Sensor, according to the selected set